Heated Air Replacement / Air Make Up Units
Paint Booths, Spray Booths, & Paint Booth Systems. The Quality & Service You Deserve.
Many Options Available to Meet Specific Requirements
Spray Booths exhaust plant
air, heating, and air-conditioning. This is both costly and inefficient. Air is taken for granted, but is a critical part to
any work environment. Air - its quality, temperature, contaminants, and movement - have an enormous impact on employee
comfort and productivity.
Most commercial and
industrial buildings were designed to meet specific ventilation requirements. As a company grows, changes in manufacturing
operations, space, and the number of employees can cause an uncomfortable and inefficient work environment.
Air Replacement Units or
Air Make-Up Units are used to control the air in the working environment. Make-up air is a system that continuously replaces
the air being exhausted with fresh air - air that can be heated, cooled, humidified, dehumidified, filtered, or simply moved
by an induction fan. Most importantly, air replacement solves the problem of air contamination, exchanging stale air,
eliminating drafts, and maintaining proper comfort zones.
We offer both In-Direct Fired and Direct Fired Air Make-Up Units. Our systems can be used for plant replacement air or can be connected directly to a paint booth. Systems connected directly to the paint booth provide the best painting environment and the ability to provide a cure cycle required by many of the current high solids paints.
Air Make-Up Replacement Specifications
All Booths with Curing Systems will Feature a Variable Frequency Drive (VFD)
With a VFD, perfect balance can be achieved through controlling the fan motor speed at the control panel. The operator simply observes the booth pressure via the mangnehelic gauge provided on the panel, and dials inthe appropriate balance, through balancing pontentiometers to adjust the frequency of the VFD as easily as one might adjust the volume on a radio. (VFD ensures constant and uniform airflow throughout a spray booth at all times.)
Curing Systems
During the spray mode, the unit delivers 100% make-up air (fresh air) to balance the air being exhausted. During the spray mode, air is delivered to 75°F (adjustable). After the painter has finished spraying, the cure button is manually activated, which initiates the purge mode. During the purge mode, the booth lights are de-energized and the spray gun solenoid disables the spray gun.
After the booth has been purged or paint fumes, the exhaust is reduced to 50%. A motorized profile damper is energized to maintain a constant velocity over the burner. The air temperature is increased to 140°F at discharge (adjustable) and the unit remains in this cure mode until the cure timer times out.
Please contact us, we look forward to working with you .
St. Louis, Missouri - Salyer, California - Dallas, Texas - Clearwater, Florida
Toll Free - 888-266-8403