Side Downdraft Booths
PRICED
AT $ 9,500
Pressurized with Intake Chamber
No Hidden Charges No Crating Charge
Side
Downdraft Booth with Heat and Cure Package
$
18,400.00
Built Solid for Easy Assembly and Long Life
|
Standard 6" Structural " I " Beam Support for Solid Booth & Easy Assembly | |
|
Standard Bridge Style Exhaust Chamber - Optimum Air Flow - Structural Support | |
|
Nut and Bolt Construction for Sure Fit and Sure Alignment | |
|
Horizontal Side Wall Lighting for More Even Light and No Shadows |
Meets N.F.P.A. 33 , O.S.H.A. , and BOCA Guidelines
The Side Downdraft booth offers most of the full downdraft booth benefits without an expensive pit. Fresh air is brought in from the clean upper levels of the shop, through filter banks in the ceiling of the booth. The clean filtered air is drawn down and away from the product through exhaust filters at floor level along both sides of the booth. The over spray is pulled away from the product and away from the painters. These spray booths are equipped with an air supply plenum and is available in both solid back and drive through designs.
Inside Dimensions: 24' Deep x 14' Wide x 9' Tall
Features:
• Air Tight 18
Gauge Galvanized Steel Construction
• 10-48" 4 Tube Fluorescent
Light Fixtures with Clear Tempered Glass
• 2 - 24" Tube-Axial Fans with
3-Phase - 2 Hp Motors – 16,000 CFM
• 9' High x 10' Wide Entrance Doors
• Personnel Door
• Draft Gauge
• Intake and Exhaust Filters and Grids – 20" x 20"
• All Hardware, Fasteners, Sealants
• Assembles in 2-3 days
• Any and All Options Available on Request
Please contact us, we look forward to working with you .
![]()
St. Louis, Missouri - Salyer, California - Dallas, Texas - Clearwater, Florida
Toll Free - 888-266-8403
![]()
Web Site Developed by TCO Web Development